How To Change IP Address On Nighthawk Router?

You are well aware that the Nighthawk router is among Netgear’s most cutting-edge networking products. These routers are well-liked by both tech-savvy users and gamers because of their strong security, quick speeds, and abundance of functions. Changing the Nighthawk Router IP Address  is one of the crucial settings you may wish to investigate. Changing the Nighthawk Router IP Address can help with network management, troubleshooting, and preventing IP conflicts. 

This blog will show you how to change the IP address on your Netgear Nighthawk Router step-by-step. We’ll also go over frequent problems, why you might want to make this modification, and how to get administrator access to your Nighthawk router. 

Why Modify the Nighthawk Router IP Address ? 

Let’s scrutinize the why formerly moving on to the how-to. You may wish to modify the IP address of your Netgear Nighthawk router for a number of reasons: 

• Prevent IP Conflicts: Disconnections and other problems may arise if two devices on your network share the same IP address. 

• Enhanced Security: Your network is a little more difficult to target when you change the default Netgear Nighthawk Router IP. 

• Custom Network Configuration: For improved network segmentation, advanced users can require particular IP schemes. 

• Resolving Access Conflicts: Occasionally, a modem or other device on your network may clash with the default IP. 

Which IP address is the default for the Netgear Nighthawk router? 

The IP address that most Nighthawk routers use by default is either 192.168.1.1 or 192.168.0.1. To access the Nighthawk login page, you input what is called the gateway IP into your web browser. 

The current Netgear Nighthawk Router IP Address  can be found by: 

• Launching the Terminal (macOS) or Command Prompt (Windows). 

• Entering netstat -nr | grep default (macOS) or ipconfig (Windows). 

• Searching for the entry for the Default Gateway. 

How to Alter the Nighthawk Router IP Address ?

Let’s now go over how to modify the IP address of your Nighthawk router step-by-step: 

 1. Go to the login page for the Nighthawk router. 

• Launch a web browser. 

• In the search bar, put the default Nighthawk Router IP Address  (192.168.1.1 or 192.168.0.1). 

• If the IP doesn’t work, you can also try routerlogin.net or routerlogin.com. 

• Put in your password and username. Unless you’ve modified it, the default password is password and the default username is typically admin. 

• You might need to use the physical reset button on your router to return it to factory settings if you can’t recall your login information. 

 2. Go to LAN Configuration 

• After logging into your Nighthawk router, do the following: 

• Select Advanced from the dashboard. 

• Select Setup > LAN Configuration. 

• The IP address and subnet mask that are currently in use are displayed in the LAN TCP/IP Setup section. 

 3. Modify the IP address 

• In the “IP Address” field, pass in your new IP address. You can alter it to 192.168.100.1, for instance. 

• Verify that the modem/router from your ISP and other devices won’t interfere with the new IP address.  

• In most home networks, you can leave the subnet mask at 255.255.255.0, although you can update it if needed. 

4. Reboot and save 

• To save your changes, click Apply. 

• The router might restart on its own. Try a manual reboot if it doesn’t. 

• You must access the Nighthawk Router Login page using the new Nighthawk Router IP Address  after rebooting. 

Tips for Troubleshooting 

• Unable to Access the New IP? Verify again that the new IP address is entered correctly and that your device is connected to the router. 

• Can’t remember your new IP address? It might be necessary to use the reset button to return the router to its original settings. 

• Still Having Problems? Use the Command Prompt to run ipconfig /release and ipconfig /renew to change your device’s IP address or disable and re-enable your network adapter. 

Things to Remember 

• Reserve IPs for Devices: If you provide the router a static IP address, you might want to reserve static IPs for other important devices as well. 

• DHCP Range Conflict: To prevent conflicts, make sure the new IP address assigned to your router does not fall inside the DHCP range. 

• Document Changes: In case you need to refer to the updated settings later, always make a note of them. 

In conclusion 

A straightforward yet effective method to personalize your network configuration, prevent conflicts, and improve security is to change the Nighthawk Router IP Address. You can change the IP address of your Netgear Nighthawk router and improve network management in a few simple steps.